As part of our Heavy Duty range of products we are pleased to offer Heavy Duty Under Fence Plinths in a range of sizes. Choose from Grey or Sandstone for your desired visual effect.
Bettacrete Precast Pty Ltd manufactures a large range of Precast Concrete Paving Slabs. They are available in Light Duty 42mm unreinforced, suitable for Pedestrian Traffic and Heavy Duty Reinforced Slabs 50mm that can be used for heavier loads.
Standard Natural Grey Slabs in all sizes are carried in in stock.
Betta-Stone Pavers are available in Natural Grey, Sandstone and Charcoal (Black) the standard size is 500 x 500 x 45mm. Half size 250 x 500 x 45 units are available as well as half size Triangular units for 45 Degree laying pattern.
All Betta-Stone Pavers are manufactured in 40MPA Concrete using our High Frequency Vibration Technique.
The Standard Straight Garden Edging comes in 1 Metre or 2 Metre Lengths.
Curved units are available at 1 Metre long and come in 90 Degrees, 45 Degrees, 22.5 Degrees and 90 Degree Right Angle
Lawn Edging is designed for the higher lip to back onto the Garden with the lower flat section placed at Lawn height.
Lawn Edging comes in lengths of 1 Metre in straight, 45 Degree Curve, 90 Degree Curve or Right Angle.
Note; there are External and Internal Curves and Corners for this design.
There are 2 types of Garden Borders that are different to the Standard Garden and Lawn edging.
No curves or corner units are available with these borders.
Bettacrete Precast Pty Ltd manufacture a range of Tree Rings, the size is measured as the internal diameter.
There are 3 styles Flat Top, Lawn Edge, Square Flat Top. All Rings may be purchased whole or cut into two halves.
Under Fence Plinths are designed to fit under most brands of Panel Fencing (Good Neighbour Type) They are available in 3 different Heights, 100, 150 and 200mm and in Natural Grey Concrete or Sandstone colour.
For Larger Fence Panels (Custom Orb) the longer units may be used.
Storm Water Channels are available in Rectangular or Semi-Circular cross section and in different lengths.
For Channels that require a Metal Grate the Rebated Channels should be used.
Bettacrete Precast Pty Ltd manufacture various sized Kerbing Units, the “Wheel Stops” are made to Australian Standard AS NZS 2890 : 1 : 2004. Galvanised Fixing Pins are also available.
The Truck Wheel Stops require 3 Fixing Pins per unit.
Bettacrete Precast Pty Ltd manufacture a range of Standard size Stair Treads as listed below or can custom make Stair Treads for specific applications. Treads can have Threaded Ferrules or Bolts cast into the underside for fixing. Treads can be “Flat Type” or “Delta Type”.
Landings are custom made to suit the application.
Bettacrete Precast Pty Ltd manufacture many sundry items, many not listed below, for anything you require made in Concrete contact our office and our friendly staff will advise if it is available or can be “Custom Made”.
Bettacrete Precast Pty Ltd manufacture heavy duty furniture for permanent Public placement the items manufactured are heavy enough to resist theft and vandal attack. All items are manufactured with High Strength 40 MPA Concrete with Steel Reinforcing using our unique High Frequency Vibration Techniques.
Bettacrete Precast manufacture a Standard Range of Pillar Capping or Custom units can be manufactured to suit a Special Application.
390mm units are designed as 1.5 Standard House Brick width plus 20mm overhang, whereas 500mm is to suit 2 Standard House Brick width plus 20mm overhang.
Bettacrete Precast Pty Ltd manufactures a range of Concrete Sleepers, used mainly to build retaining wall structures but can also be used for many other applications.
For Retaining Walls up to 1 Metre High the 80mm thick units are used and for Retaining Walls over 1 Metre the 100mm thick units are used.
In Retaining Wall applications, Steel “H” Posts are installed at the required intervals, then the Sleeper is then lowered between the Posts.
Bettacrete Precast Pty Ltd manufactures a range of Precast Concrete Building Stumps. Stumps are available in 100 x 100mm cross section from 600mm to 1500mm in length and in 125 x 125mm cross section from 600mm to 2100mm in length all in 100mm increments. The standard stump has an 8mm Steel Rod protruding 300mm in the top for Beam Tying purposes. Threaded rod may also be cast in upon request.
All Bettacrete Stumps are mad from 40 MPA Concrete with our unique high Frequency Vibration Technique.